Startseite ASF-Leckanzeiger Gardner Denver Thomas GmbH

    
    
Deutsch/German Polska/Polish
Leak Detection Systems Overview
Operating Principles of Leak Detection Systems
Container Design
Piping
Liquid / Gas Medium
Accessories
Downloads
   ASF LEAK DETECTOR TYPE V90 – Version “N” - VACUUM PRINCIPLE

   General Design Permit (DIBT) No. Z-65.22-399 (Tested by TÜV Nord, Hamburg)


Print Version




 
Applications
 
  • The leak detector with an explosion protected housing bottom can be used on double-walled tanks with a suction line down to the vessel bottom.
  • The leak detector can also be used to monitor single-walled tanks with a leak protection lining, if this is approved for the values noted below.
  • For monitoring of water-polluting liquids and flammable liquids with a flash point < 55°C, the explosion group IIA (IIB as an option) and the temperature class T4 are assigned.
  • The storage medium may only have the density allowed for the container type.

The leak detector must be mounted outside the hazardous area (ex-zone)!


Function
 
  • Partially explosion protected leak detector on the vacuum principle, with integrated vacuum pump, consisting of:
  • Combined with a housing upper part (SK) and bottom (AK). Within the cluster housing, the ex-zone separation was made, so that the leak detector is suitable for the control of flammable liquids.
  • With built-in potential-free relay.
  • In the lower part of the housing a detonation fuse is fitted in the intake and exhaust pipe by standard.

Operating vacuum:
in the interstitial space
max. -80 mbar +/- 5 mbar

Switching values: relative pressure 
Alarm ON PAE = -34 +0/-10 mbar
Pump OFF PPA = -80 +/-5 mbar

For further data please see the data sheet of the V90 N leak detector.

 
Operating Conditions
 
  • Approved leak protection lining with general building inspectorate approval.
  • No leak detection fluid is allowed in the interstitial space.
  • Compliance with the relevant explosion protection guidelines for liquids with flash point < 55°C
  • The leak detector must be mounted outside the hazardous area (ex-zone)!


Accessories
  • Mounting Kits (MBS) for connection to containers.
  • For the extended field of application, these leak detectors are built alternatively in stainless steel.


Mounting Examples

Please click on the picture for a larger view!

Picture a Picture b
Picture c Picture d
 
Product Images

Leak Detector Type V90 N - Vacuum Principle

Leak Detector Type V90 N - Vacuum Principle


Documentation
 
Installation and Operation Manual V90 Variante NInstallation and Operation Manual V90 Variante N
Data Sheet V90 NData Sheet V90 Variante N
General Design Permit (DIBT) V90 Variante NGeneral Design Permit (DIBT) V90 Variante N
V90 Version N AccessoriesV90 Variante N Accessories & Assembly Kits




Top

Print Version

Copyright 2008-2015 © Gardner Denver Thomas.
Terms of Use/Privacy Policy | Imprint | General Terms and Conditions